PRIMELINE TOOLS N 6796 Stamped Steel, Adjustable, Closet Door, Floor Guide

Prime-Line Stamped Steel, Adjustable, Closet Door, Floor Guide 1.38 H x 5.0 W x 6.5 D in gray in Silver | 1.38" H X 5" W X 6.5" D | Wayfair

This is an adjustable stamped steel sliding closet door floor guide, with nylon tips. The guides are made of white nylon and can be adjusted to accommodate doors from 3/4 in. to 1-3/8 in. wide. Used by a variety of closet door manufacturers. |... ... more

Prime-Line Stamped Steel, Adjustable, Closet Door, Floor Guide (Single Pack) 0.88 H x 3.94 W x 0.63 D in yellow in Gold | Wayfair N 6796

The Prime-Line N 6796 Bypass Closet Door Floor Guide helps keep sliding door panels centered on their respective tracks. Use the sliding door floor guide for Johnson Hardware and a variety of other closet door manufacturers. Easily install the closet... ... more

Prime-Line Stamped Steel, Adjustable, Closet Door, Floor Guide (Single Pack) 4.1 H x 1.85 W x 1.3 D in Yellow | 4.1" H X 1.85" W X 1.3" D | Wayfair

This is a by-pass floor guide used primarily on Johnson Hardware closet doors. It has a stamped steel floor base with adjusting slots for the nylon guides to fit into. The nylon guides are adjustable to accommodate 3/4 in. to 1-3/8 in. closet doors if... ... more

Prime Line N 6565 Door Guide, 1-7/16" x 3/4"

Single door nylon retainer Used by many manufacturers Includes four no. 8 x 3/4" Phillips pan head sheet metal screws. Highlights: Bottom Mount Carded Width: 1-7/16" Height: 3/4" Material: Nylon Mount: Floor Adjustable: No Length: 1-5/16" ... more

PRIMELINE TOOLS N 6534 7/8 in., Top Mount Bi-fold Tandem Roller, Offset (Single

This is a top, center mounted, adjustable, tandem roller assembly. The 7/8 inch round edged or convex nylon rollers are attached to a stamped steel tandem housing and sits offset on top of a 5/16 inch threaded steel rod. The unique positioning of the... ... more

PRIMELINE TOOLS N 6710 Bi-Fold Door Top Pivot Bracket (1 Set)

This is used to replace some new style bi-fold pivot brackets found on bi-fold doors. It is made up of a two piece nylon body with a stamped steel locking plate that locks it into place in the track. Install the bracket 1/2 inch from the door jamb.... ... more

PRIMELINE TOOLS N 6560 Stamped Steel, Adjustable, Closet Door, Floor Guide (2

This is an adjustable stamped steel sliding closet door floor guide, with nylon tips. The guides are made of white nylon and can be adjusted to accommodate doors from 3/4 inch to 1-3/8 inch wide. Used by a variety of closet door manufacturers. •Used by... ... more

PRIMELINE TOOLS N 7363 Pocket Door Pull,3-53/64" L

This Prime-Line N 7363 Closet Pocket Door Pull features a hidden pull and can be used on a variety on a variety of pocket door manufacturers. The closet door handle can be reversed from left-handed to right-handed. Easily install the closet handle with... ... more

PRIMELINE TOOLS 161792 Bypass Closet Track Kit, 60 in., 2-Door Hardware,

This by-pass closet door track kit is constructed of a galvanized track, with other steel and plastic components. It features double-J tracks for the installation of a 2-door panel system. The track length is pre-cut to 59-in. to minimize the need for... ... more

PRIMELINE TOOLS 161791 Bypass Closet Track Kit, 48 in., 2-Door Hardware,

This by-pass closet door track kit is constructed of a galvanized track, with other steel and plastic components. It features double-J tracks for the installation of a 2-door panel system. The track length is pre-cut to 47 in. to minimize the need for... ... more

PRIMELINE TOOLS N 6724 Closet Door Roller,3-3/4" L

The Prime-Line N 6724 Sliding Door Wheels Assembly is a four roller pocket door roller assembly used on Kennaframe pocket doors and a variety of other pocket door manufacturers. The pocket door assembly is affixed to an adjustable spring-loaded steel... ... more

PRIMELINE TOOLS N 6549 Closet Door Guide,3-3/4" L

These panel wardrobe door guides are constructed of stamped steel and include nylon inserts. Included with this pair of guides are 1 left-hand and 1 right-hand door guide, both which mount at the bottom of older style Acme and Stanley wardrobe doors.... ... more

PRIMELINE TOOLS N 6870 Mirror Door Roller,3-3/4" L

This Prime-Line N 6870 Mirror Door Roller Assembly is constructed of a steel housing and a concaved (grooved) edge, plastic wheel. The housing has 2-1/2 inch mounting hole centers, its body measures 1-11/16 inch wide and its only 7/16 inch deep. This... ... more

PRIMELINE TOOLS N 6881 Bypass Mirror Door Bottom Track, 72 in., Roll-Formed

This bottom track is constructed from roll-formed steel and comes finished in champagne gold. The track can be used for new installs, or to replace missing or damaged bottom tracks of by-passing mirror doors that use convex edge mirror door roller... ... more

PRIMELINE TOOLS N 6620 1-1/4 in. Nylon Pocket Door Roller Assembly with Steel

This pocket door roller assembly is constructed of a nylon tire, steel ball bearings and a diecast bracket. The roller on this assembly features a convex (round) edge wheel and it mounts with two (2) fasteners. It is a top-mount assembly, typically... ... more

PRIMELINE TOOLS N 6531 Twin Pocket Door Roller, Top Mount (2 Pack)

This tandem roller assembly is constructed from nylon. It features an adjustable top mount design with round edge nylon wheels with a 1/2 inch nut. It fits Acme and other similar styled doors that are 3/4 inch to 1-3/4 inch thick. •Used as a pocket... ... more

PRIMELINE TOOLS N 6948 Bi-Fold Door Guide Cap, Nylon, Fits 1/4 in. Rod (4 Pack)

Closet Door Guide Cap, Bi-Fold Door, Nylon, White, Unfinished Finish, Shaft Length 5/8 in, Length (In.) 3/4 in, Height (In.) 5 7/16 in, Width (In.) 3 13/16 in, Depth (In.) 5/8 in, Wheel Diameter Not Applicable, Roller Width/Dia. (In.) No Roller, Door... ... more

PRIMELINE TOOLS N 6936 Bi-Fold Door Hinges, Brass Plated, for Bi-Fold Doors (1

This is a set of brass hinges used on bi-fold doors. They are the non-mortised style hinges. The unique design causes the doors to be self-aligning. Used on wood doors 3/4 inch thick. •Brass Plated Hinges •Stamped Steel Construction •Non-Mortise Style... ... more

PRIMELINE TOOLS N 6517 Bypass Closet Door Top-Hung Back Rollers and Brackets (2

This is a side mount, top hung adjustable roller bracket with a 3/4 inch ball bearing convex nylon roller and 1/2 inch offset that fits onto the back wardrobe door panel. It fits 3/4 inch to 1-3/8 inch thick doors. •Used by a variety of by-pass door... ... more

PRIMELINE TOOLS N 6701 Bi-Fold Door Pivot and Guide, Nylon (2 Pack)

This bi-fold door pivot is constructed from nylon. It features a spring-loaded top mount design with a 7/16 inch diameter cap. With the spring loaded design it makes the removal of the door effortless. The 7/16 inch nylon base is used by a variety of... ... more

PRIMELINE TOOLS N 7302 Bi-Fold Top Mount Pivot and Guide, 3/8 in. Pivot Cap,

This is a top mount bi-fold door guide wheel/cap on a spring-loaded steel shaft in a 3/8 inch nylon housing. The guide cap/wheel is 3/8 inch in diameter with a 5/8 inch lip and is used to fit into a 5/8 inch bi-fold door track. •Bi-fold door top guide... ... more

PRIMELINE TOOLS N 7266 Bi-Fold Door Top Pivot and Guide Wheel (2 Pack)

This bi-fold pivot and guide set includes one pivot and one guide. The pivot fits a 3/8 inch diameter bore and has a 1/4 inch pivot stem. The top guide wheel fits on 7/8 inch wide track systems. A flat nylon ball-bearing wheel is attached to a metal... ... more

PRIMELINE TOOLS N 7289 Solid Brass, Satin Nickel, Ball Bullet Catch and Strike

Closet Door Ball Catch/Strike, Sliding Door, Nylon, Silver, Unfinished Finish, Shaft Length 1-13/64 in, Length (In.) 2 1/8 in, Height (In.) 5 13/32 in, Width (In.) 3 3/4 in, Depth (In.) 1 13/64 in, Wheel Diameter Not Applicable, Roller Width/Dia. (In.)... ... more

PRIMELINE TOOLS N 6512 Wardrobe Door Front Roller Assembly, 1 in., Convex Nylon

This is a single wheel; top hung, side mounted adjustable roller bracket with a 1 inch convex nylon roller that fits onto the front wardrobe door panel. The stamped steel adjustable bracket has a 1/4 inch offset and fits onto a 3/4 inch to 1-3/8 inch... ... more

PRIMELINE TOOLS 161793 Bypass Closet Track Kit, 72 in., 2-Door Hardware,

This by-pass closet door track kit is constructed of a galvanized track, with other steel and plastic components. It features double-J tracks for the installation of a 2-door panel system. The track length is pre-cut to 71-in. to minimize the need for... ... more

PRIMELINE TOOLS GD 52106 Heavy Duty Standard Garage Hinge 3 in. width Door

Garage Door Hinge, Steel Material, Galvanized Steel Finish, N/A Load Capacity, With Holes, 2 Holes per Leaf, No Ligature Resistant, 180 Degrees Range of Motion, Orientation Non Handed, 1 7/8 in Door Leaf Height, 3 in Door Leaf Width, 0.078 in Door Leaf... ... more

PRIMELINE TOOLS GD 52105 Heavy Duty Standard Garage Hinge 3 in. W Door Leaf,

Garage Door Hinge, Steel Material, Galvanized Steel Finish, N/A Load Capacity, With Holes, 2 Holes per Leaf, No Ligature Resistant, 180 Degrees Range of Motion, Orientation Non Handed, 1 7/8 in Door Leaf Height, 3 in Door Leaf Width, 0.078 in Door Leaf... ... more

PRIMELINE TOOLS N 7288 Ball Bullet Catch and Strike, Satin Nickel Finished

This is a ball bullet catch and strike. Satin nickel finished solid brass. 1/2 inch by 1-1/2 inch long barrel for mortise installation. Used on interior swinging closet or pantry doors. •Satin nickel solid brass •1/2 inch diameter by 1-1/2 inch long... ... more

PRIMELINE TOOLS N 6649 Closet Door Roller, Back, 3/8 in. Offset, 7/8 in. Nylon

This roller assembly is constructed from nylon. It comes affixed to a 3/8 inch offset stamped steel bracket. It fits on doors that are 3/4 inch to 1-3/8 inch thick. •Used as closet door rollers for the front panel •For 3/4 inch to 1-3/8 inch thick... ... more

PRIMELINE TOOLS GD 52197 Bottom Lifting Brackets, Fits 7/16 in. Diameter Garage

These garage door lift brackets are constructed of heavy-duty 13 gauge stamped steel and come in a galvanized finish. Each set includes one left-hand and one right-hand bracket, and they are for use with sectional garage door systems constructed of... ... more

PRIMELINE TOOLS N 6950 Pocket Door Guide, Jamb Mounted, Nylon (1 Pair)

This is a set of left and right-hand nylon pocket door guides that can be used for any thickness door. It is a universal fit used by a variety of pocket door manufacturers that is screwed onto the jamb under the trim. It has slotted holes for... ... more

PRIMELINE TOOLS N 6877 Bypass Mirror Door Bottom Track, 72 in, Roll-Formed

This bottom track is constructed from roll-formed steel and comes finished in satin nickel. The track can be used for new installs, or to replace missing or damaged bottom tracks of by-passing mirror doors that use convex edge mirror door roller... ... more

PRIMELINE TOOLS GD 52107 Standard Hinge, #4 Position with Fasteners, 3 in. Wide

Garage Door Hinge, Steel Material, Galvanized Steel Finish, N/A Load Capacity, With Holes, 2 Holes per Leaf, No Ligature Resistant, 180 Degrees Range of Motion, Orientation Non Handed, 1 7/8 in Door Leaf Height, 3 in Door Leaf Width, 0.078 in Door Leaf... ... more

PRIMELINE TOOLS GD 52104 Standard Hinge, #1 Position, with Fasteners, 3 in.

Garage Door Hinge, Steel Material, Galvanized Steel Finish, N/A Load Capacity, With Holes, 2 Holes per Leaf, No Ligature Resistant, 180 Degrees Range of Motion, Orientation Non Handed, 1 7/8 in Door Leaf Height, 3 in Door Leaf Width, 0.078 in Door Leaf... ... more

HERACLES No Groove Adjustable Sliding Door Guide, Bottom Floor Guide, Barn Door Floor Guide Floor Mount | Wayfair 3275*2YEFU

Barn Door Floor Guide is very solid and heavy duty . The Black Door Floor Guide is finished in solid carbon steel (High Standard Q235) multiple high temperature fine electrostatic powder spraying process black frosted. It is ideal for heavy doors like... ... more

Prime-Line Sliding Closet Door Roller Kit, 7/8 in. Wheel Diameter, Convex (Round) Edge Plastic, Stamped Steel Construction | Wayfair N 7537

This by-pass closet door repair kit includes four roller assemblies constructed of stamped steel brackets and plastic wheels. One pair of roller assemblies is for installation on the front sliding panels and have only a 1/4 in. offset. The other pair... ... more

Prime-Line Sliding Closet Door Roller Kit, 3/4 in. Wheel Diameter, Convex (Round) Edge Plastic, Stamped Steel Construction | Wayfair N 7533

This double cylinder deadlock is constructed of diecast and it comes in a chrome plated finish. It features a jimmy-resistant design which prohibits forced entry when attempts are made to spread the door away from the frame. | Prime-Line Sliding Closet... ... more