You're in Building Supplies
Need a Personal Shopper?
Subscribe to
Bizrate emails for the hottest
deals & products,
PLUS a chance to
WIN $25
sign me up!
New winners chosen weekly.
No purchase necessary.
| Best Seller  | Prime-line part F 2919 is a vinyl window sweep latch for use on single-hung and double-hung vertical sliding windows. This item includes a latch, fasteners, and easy-to-follow installation instructions. These bronze-colored latches are constructed... ... more | go to store |
 | Prime-line part F 2919 is a vinyl window sweep latch for use on single-hung and double-hung vertical sliding windows. This item includes a latch, fasteners, and easy-to-follow installation instructions. These bronze-colored latches are constructed... ... more | go to store |
| Best Seller  | This is a F-tab patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller. When the corner screw passes through the F- tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides... ... more | go to store |
 | This is a E-tab patio door roller assembly with a 1-1/8 in. concave or grooved steel ball bearing roller. As the corner screw passes through the E-tab it captures the roller assembly and positions it in the door's bottom rail. The housing is 23/32... ... more | go to store |
 | Slide Latch, 2-3/4" Centers, with Offset Bar, Chrome. 2-3/4 Inch Hole Center Spacing. Supplied With Offset Slide Bolt. Use with Bobrick Manufacturers. Prime-Line | Prime-Line Slide Latch, 2-3/4 in. H.C. Plated (Single Pack) 1.75 H x 4.0 W x 5.0 D in... ... more | go to store |
 | This is an outside door pull that improves grip for opening door from outside. The 4-15/16 in. hole pattern is offset 1/8 in. from center line to work with Adams Rite, W and F and similar type mortise latches. The 3-15/16 in. hole centers work with... ... more | go to store |
 | This is a multi-point lock constructed of yellow zinc for wood and vinyl sliding patio doors with a 45 degree keyway. The mounting holes are 12 in. on center, has a 5-5/8 in. on center between the hooks, a 1-9/16 in. backset, and a 1 in. in width.... ... more | FREE shipping go to store |
 | This is a multi-point lock constructed of yellow zinc for wood and vinyl sliding patio doors with a 45 degree keyway. The mounting holes are 12 in. on center, has a 5-5/8 in. on center between the hooks, a 1-9/16 in. backset, and a 1 in. in width.... ... more | FREE shipping go to store |
 | This is a white flush mounted handle and latch set used by many patio door manufacturers. It has a steel hook latch with 1 inch standard spacing. This handle set will fit a minimum door thickness of 15/16 inch and up to a maximum thickness of 1-1/8... ... more | go to store |
 | This is a sash lock and keeper. Constructed from diecast zinc it comes in a white finish. They are found on a variety of sashes and due to their design are often used as a child safety lock. The slim-line design allows a minimum projection for a... ... more | go to store |
 | This is a sash lock and keeper. Constructed from diecast zinc it comes in a finish. They are found on a variety of sashes and due to their design are often used as a child safety lock. The slim-line design allows a minimum projection for a maximum... ... more | go to store |
 | This is a sash lock and keeper. They are found on a variety of sashes and due to their design are often used as a child safety lock. The slim-line design allows a minimum of projection for a maximum unobstructed view. All the necessary installation... ... more | go to store |
 | This is a sash lock and keeper. Constructed from diecast zinc it comes in a white finish. They are found on a variety of sashes and due to their design are often used as a child safety lock. The slim-line design allows a minimum projection for a... ... more | go to store |
 | This is a sash lock and keeper. They are found on a variety of sashes and due to their design are often used as a child safety lock. The slim-line design allows a minimum of projection for a maximum unobstructed view. All the necessary installation... ... more | go to store |
 | This is a sash lock and keeper. Constructed from diecast zinc it comes in a white finish. They are found on a variety of sashes and due to their design are often used as a child safety lock. The slim-line design allows a minimum projection for a... ... more | go to store |
 | This is a sash lock and keeper. Constructed from diecast zinc it comes in a finish. They are found on a variety of sashes and due to their design are often used as a child safety lock. The slim-line design allows a minimum projection for a maximum... ... more | go to store |
 | This is a sash lock and keeper. Constructed from diecast zinc it comes in a white finish. They are found on a variety of sashes and due to their design are often used as a child safety lock. The slim-line design allows a minimum of projection for... ... more | go to store |
 | This is a sash lock and keeper. Constructed from diecast zinc it comes in a white finish. They are found on a variety of sashes and due to their design are often used as a child safety lock. The slim-line design allows a minimum of projection for... ... more | go to store |
 | This is a sash lock and keeper. They are found on a variety of sashes and due to their design are often used as a child safety lock. The slim-line design allows a minimum of projection for a maximum unobstructed view. All the necessary installation... ... more | go to store |
 | This is a sash lock and keeper. Constructed from diecast zinc it comes in a white finish. They are found on a variety of sashes and due to their design are often used as a child safety lock. The slim-line design allows a minimum of projection for... ... more | go to store |
 | This is a sash lock and keeper. Constructed from diecast zinc it comes in a white finish. They are found on a variety of sashes and due to their design are often used as a child safety lock. The slim-line design allows a minimum of projection for... ... more | go to store |
 | This is one of several keepers or strikes used by the various casement, project-out, transom, or hopper window locks. It provides a surface for the lock to strike against while causing the lock to tighten as it slides up the angled surface of the... ... more | go to store |
 | This casement window operator is a right-handed, aluminum, surface mount body type with four mounting holes in the top of the body and mounts directly onto the sill. It has a 9 in. steel arm with a round disc on the tip. The disc slides in the... ... more | go to store |
 | This is a transom latch hook that fits onto the end of a pole and opens or closes upper story transom or hopper windows. Made of cast white bronze, it fits onto a 3/4 in. diameter pole. The hook part grabs the ring on the transom catch and opens as... ... more | go to store |
 | This is a left-handed bronze diecast casement window latch used by a variety of vinyl or wood window manufacturers. It is installed on the opening edge of the casement window. The lever operates a steel latch within the housing that engages the... ... more | go to store |
 | This is an awning operator of aluminum diecast construction with an aluminum painted finish used on Stanley windows. It is left-handed with a matching crank handle with an offset link arm. It has a reversed L-shaped mounting hole pattern with one... ... more | go to store |
 | Has your sliding screen door handle broken, is it worn out, cracked, been damaged or just worn out? This sliding screen door handle and latch is non-handed, so it can be used on right or left-handed screen doors. Used by a wide variety of screen... ... more | go to store |
 | These screen frame top hangers and latch are constructed of aluminum and come in a mill finish. They are used for the installation of aluminum screen frames on vertical and horizontal sliding windows, such as on single hung, double hung and sliders.... ... more | go to store |
 | This is an awning operator of aluminum diecast construction with a natural aluminum finish used on Crown windows. It is left handed with a matching crank handle with a 2-5/8 inch offset link arm. It has a straight 2-1/4 inch link arm with one hole... ... more | go to store |
 | This is an awning operator of aluminum diecast construction with a natural aluminum finish used on Crown windows. It is left handed with a matching crank handle with a 2-5/8 inch offset link arm. It has a straight 2-1/4 inch link arm with one hole... ... more | go to store |
 | This is the replacement inner housing that fits into the Prime-Line part D 1545 outer housing. It has a 1-1/2 in. steel ball bearing roller installed in the stamped steel inner housing. If needed, the adjusting screw can be backed out of the old... ... more | go to store |
 | This casement window operator is a right-handed, aluminum, surface mount body type with four mounting holes in the top of the body and mounts directly onto the sill. It has a 9 in. steel arm with a round disc on the tip. The disc slides in the... ... more | go to store |
 | This is a diecast bronze transom latch used on project-in windows. Often called a transom or hopper type of window that is above door height, the ring on the latch makes it easy for the consumer to reach up with a transom pole and hook (Prime-Line... ... more | FREE shipping go to store |
 | This transom window pole is constructed from aluminum. It includes a die-cast hook and a 3/4 in. diameter aluminum pole. This pole is ideal for reaching and actuating ring latches on out-of-reach tilt-in or transom windows. Prime-Line | Prime-Line... ... more | FREE shipping go to store |
 | This is a sash lock and keeper. Constructed from diecast zinc it comes in a white finish. They are found on a variety of sashes and due to their design are often used as a child safety lock. The slim-line design allows a minimum of projection for... ... more | go to store |
 | This sliding window lock is constructed of an extruded aluminum housing with a diecast cam-action lever. Comes in an anodized aluminum finish. The design of this lock is manufactured to fit on older style, metal framed, horizontal sliding windows;... ... more | go to store |
 | This is a sliding window secondary bolt lock designed to mount on most dual glazed sliding windows for added security. Features a narrow body white plastic housing with steel bolt has a 7/8 in. throw. Works on both horizontal and vertical sliders.... ... more | go to store |
 | These sliding window locks are constructed from extruded aluminum and come in a milled aluminum finish. This set includes a round plastic wrench for easy operation and additional torque. These locks install on sliding windows with a 1/4 in. or less... ... more | go to store |
 | These sliding window locks are constructed from extruded aluminum and come in a white painted finish. This set includes a round plastic wrench for easy operation and additional torque. These locks install on sliding windows with a 1/4 in. or less... ... more | go to store |
Ads related to Prime-Line Window Sweep Latch 2-1/4 H/C No Keep w/Screws Single Pack 5.44 H x 3.81 W x 0.63 D in brown in Bronze | Wayfair F 2919
