You're in Home Hardware
Need a Personal Shopper?
Subscribe to
Bizrate emails for the hottest
deals & products,
PLUS a chance to
WIN $25
sign me up!
New winners chosen weekly.
No purchase necessary.
| Best Seller  | This is a security wrench used to open or close casement security locks. Often called air conditioner locks, these locks have no handle to turn and require this wrench to release them. Constructed of heavy cast bronze, it also comes with a hex tool on... ... more | go to store |
 | This casement window operator is a right-handed, aluminum, surface mount body type with four mounting holes in the top of the body and mounts directly onto the sill. It has a 9 in. steel arm with a round disc on the tip. The disc slides in the... ... more | go to store |
| Best Seller  | This flat-edged sliding window roller is constructed from steel. It comes affixed to nylon housing. This style roller is used on acorn series 2100 thru series 2300, new style windows. | Prime-Line Sliding Window Roller Assembly, 5/8 in. Flat Steel... ... more | go to store |
 | This is a plain back tandem roller assembly with two 1-1/2 in. concave or grooved steel ball bearing rollers. The stamped steel housing is adjustable. Used by a variety of manufacturers of vinyl patio doors. The housing is 3/4 in. wide and 1 in. tall... ... more | go to store |
 | This is a plain back tandem roller assembly with two 1-1/4 in. concave or grooved steel ball bearing rollers. The stamped steel housing is adjustable and is used by a variety of manufacturers of vinyl, aluminum or wood doors. The housing is a plain... ... more | go to store |
 | This is a unique housing tandem roller assembly used by a variety of manufacturers of sliding patio doors. It has two 1-1/4 in. concave or grooved steel ball bearing rollers set in line in a stamped steel housing with end adjustment . The square shaped... ... more | go to store |
 | This is a unique housing tandem roller assembly most often found on Andersen wood patio doors as well as a variety of other manufacturers of wood patio doors. It has tandem 1-1/4 in. concave or grooved steel ball bearing rollers set in line in a... ... more | go to store |
 | This is a C-tab tandem roller assembly with two 1-1/8 inch steel ball-bearing rollers. The C-tab fits around the corner screw and is captured by the side stile and bottom rail as they are drawn together. The adjustable stamped steel housing is 11/16... ... more | go to store |
 | This is a C-tab stainless steel tandem roller with two 1-1/4 in. concave or grooved stainless steel ball bearing rollers installed. The C-tab fits around the corner screw and captured by the side stile and bottom rail as they are drawn together. The... ... more | FREE shipping go to store |
 | This is a project-in (or push-in) locking handle used on steel windows. It is right-handed with a 7/16 in. hook projection. The mounting holes are 1-3/8 in. on center and it is a heavy white bronze casting. | Prime-Line Project-In Locking Handle, Left... ... more | FREE shipping go to store |
 | This is a stainless steel mortise lock designed for a 45 degree keyway. The hook is spring-loaded with an adjustable hook projection that extends to the locked position to automatically latch upon closing, and the adjustment screw is on the face of the... ... more | go to store |
 | This is a C-tab patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. The C-tab fits around the corner screw and captured by the side stile and bottom rail as they are drawn together. The housing is 9/16 in. wide and 1-3/8 in.... ... more | go to store |
 | This is a unique back tandem roller assembly with two 1-1/2 in. concave or grooved steel ball bearing rollers. The housing is 13/16 in. wide with a 1-1/8 in. flare, 1-15/32 in. tall and 4-1/2 in. long. It has two machine threaded mounting screw holes... ... more | go to store |
 | This is a F-tab patio door roller assembly with a 1-1/4 in. concave Plastic ball bearing roller. When the corner screw passes through the F-tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides together. The... ... more | go to store |
 | This is a F-tab patio door roller assembly with a 1-1/4 in. concave Plastic ball bearing roller. When the corner screw passes through the F-tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides together. The... ... more | go to store |
 | This is an adjustable diecast plain back patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller used primarily by Canadian Patio Door Manufacturers. It's plain back diecast housing is 1/2 in. wide, 1 in. tall and 1-9/16 in. long.... ... more | go to store |
 | This is a unique back patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. It's has a tab design on the bottom back edge that snaps the roller assembly into place on the door stile edge before being held in place by a mounting... ... more | go to store |
 | This is a C-tab tandem roller assembly with 1-1/8 in. steel ball bearing rollers installed. The C-tab fits around the corner screw and captured by the side stile and bottom rail as they are drawn together. The adjustable stamped steel housing is 9/16... ... more | go to store |
 | This is a plain back patio door roller assembly with a 1-1/8 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 5/8 in. wide, 1 in. tall and 2-1/8 in. long. It is rear adjusting with a 1/4-20 threaded mounting hole on... ... more | go to store |
 | This is a Plain back patio door roller assembly with a 1-1/2 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 11/16 in. wide with a 27/32 in. flare, 1-1/8 in. tall and 2-7/16 in. long. It is rear adjusting with a... ... more | go to store |
 | This is a plain back patio door roller assembly with a 1-1/2 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 11/16 in. wide with a 7/8 in. flare, and 1-9/16 in. tall. It is rear adjusting with a 1/4-20 threaded... ... more | go to store |
 | This is a diecast bronze transom latch used on project-in windows. Often called a transom or hopper type of window that is above door height, the ring on the latch makes it easy for the consumer to reach up with a transom pole and hook (Prime-Line part... ... more | FREE shipping go to store |
 | This double cylinder deadlock is constructed of diecast and it comes in a chrome plated finish. It features a jimmy-resistant design which prohibits forced entry when attempts are made to spread the door away from the frame. | Prime-Line Diecast,... ... more | go to store |
 | This is a sliding window roller assembly with a flat edge wheel. This flat edge sliding window roller is constructed from nylon. It comes affixed to nylon housing. This style roller fits on guaranteed products and similar styled sliding windows. |... ... more | go to store |
 | It comes affixed to a nylon housing that can adjust for anti-lift protection. This style roller is used on Hilite 200 series sliding windows. | Prime-Line Sliding Window Roller Assembly, 1/2 in. Flat Steel Roller 5.44 H x 3.82 W x 0.63 D in White |... ... more | go to store |
 | This is a sash lock and keeper. Constructed from diecast zinc it comes in a white finish. They are found on a variety of sashes and due to their design are often used as a child safety lock. The slim-line design allows a minimum projection for a... ... more | go to store |
 | This kick plate is constructed from aluminum and it features a removable PVC protective coating. This kick plate will provide full coverage on 36 in. wide doors. Custom sizes of this finish are available for special order. These door kick plates are... ... more | go to store |
 | This is a sash lock and keeper. Constructed from diecast zinc it comes in a white finish. They are found on a variety of sashes and due to their design are often used as a child safety lock. The slim-line design allows a minimum projection for a... ... more | go to store |
 | This is a sash lock and keeper. They are found on a variety of sashes and due to their design are often used as a child safety lock. The slim-line design allows a minimum of projection for a maximum unobstructed view. All the necessary installation... ... more | go to store |
 | These sliding window locks are constructed from extruded aluminum and come in a white painted finish. This set includes a round plastic wrench for easy operation and additional torque. These locks install on sliding windows with a 1/4 in. or less... ... more | go to store |
 | This jalousie operator by Prime-Line Products is constructed of diecast materials and comes in an aluminum painted-finished. The mounting holes are spaced apart at 4-3/4 in. or 3-7/8 in. on center. It is a reversible non-handed design that can be used... ... more | go to store |
 | This is a zinc diecast drop down door holder with a three hole mounting plate. It has a 4 in. rise and a bronze finish. Ideal for commercial and residential applications. | Prime-Line 3 Hole Diecast Spring-Loaded Door Holder (Single Pack) 8.44 H x 3.82... ... more | go to store |
 | This kick plate is constructed from aluminum and it features a removable PVC protective coating. This kick plate will provide full coverage on 36 in. wide doors. Custom sizes of this finish are available for special order. These door kick plates are... ... more | go to store |
 | This is a sash lock and keeper. Constructed from diecast zinc it comes in a finish. They are found on a variety of sashes and due to their design are often used as a child safety lock. The slim-line design allows a minimum projection for a maximum... ... more | go to store |
 | This is a plain back patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 21/32 in. wide with a 3/4 in. flare and 1-1/8 in. tall. It is rear adjusting with a threaded mounting... ... more | go to store |
 | This is a black plastic housing, flat edge plastic roller. It has a 1/16 in. inside channel guide leg. Used by Premiere and a variety of other window manufacturers. | Prime-Line 1/16 in. Guide Leg Nylon, Sliding Window Roller Assembly 5.44 H x 3.82 W x... ... more | go to store |
 | This is a U-back, patio door roller assembly with a flat 1-1/2 in. ball bearing roller in a stamped steel U-back style housing. When installed the U-back housing is drawn tightly into position against the side stile as the mounting screw or bolt is... ... more | go to store |
 | This is a stainless steel unique housing tandem roller assembly, often found on Andersen sliding patio doors as well as a variety of other manufacturers of wood patio doors. It has two 1-1/4 in. concave stainless steel ball bearing rollers set in a... ... more | FREE shipping go to store |
 | This sliding glass door roller assembly is constructed from steel and features a height-adjustable housing. The concaved (grooved) edge wheels installed in these roller assemblies are constructed of plastic and include steel ball bearings for smooth... ... more | go to store |
Ads related to Prime-Line Single 1-1/4 in. Roller Assembly, Diecast Unique Housing Single Pack 7.44 H x 3.82 W x 0.63 D in black in Zinc | Wayfair D 1640
